Nuforce BE6 WIRELESS
The miniature metal body, while posed a difficult design challenge, provides a rigid and resonance free chassis for crisp and clean sound. Magnetic caps at the end of the earphones let users click the earphones together for ease of use.
To extract best performance in a tight space, BE-6 incorporates a pair of newly developed 10mm earphone drivers using advanced engineering material: A proprietary mix of titanium, magnesium, and other ingredients were sputtered on the diaphragm to form a nano layer of thin metal crystallized surface. The addition of the metal nano layer reduces cone flex and ensure accurate pistonic movement when actuated with an audio signal. Strong neodymium magnet motor structure provides high flux giving responsive transients. An addition copper ring is used to control the flux and further reduce driver distortion.
Advanced titanium-magnesium-inert metal sputter-coated 10mm drivers, with a circumferential copper ring for optimal structural integrity.
Each BE6 is 100% quality controlled for the best sound quality. Frequency response, distortion, sensitivity, balance and polarity are all measured with high end CLIO measuring system.
BE6 channel balance is carefully controlled, and unlike conventional earphones, BE6 left and right drivers´ channel balance is within 1dB – which is lower than what some of the high end speaker manufacturers are able to achieve.
BE6 is capable of providing extremely dynamic, transparent and crystal clear sound quality even at high volume levels. The BE6 THD is less than 0.5% at 1kHz/100dB SPL – and less than 3% across the audible frequency range.
Precision machined thin-wall alloy body with hard-wearing anodisation—the lightest sweat-resistant metal in-ear on the market.
Proprietary, specially developed short silicon tips with an acoustically calculated “large flare opening” for optimal sound projection.
|Baterry life per charge||Up to 6hrs|
|Driver size||10 mm|
|Microphone sensitivity||-43dB +/-3dB|
|Frequency response||20Hz - 20kHz|
|Distortion||< 0.5% at 1kHz/100dB SPL|
|Operation range||Up to 30m (depend of the environment)|
|+ Silicon tips (Silicon 4 pairs in L/M/S/XS)
+ Comply tips (two pairs in L/M)
+ Stabilizers (1 pair)
+ Cable loop for adjusting the length of cable
+ Carry Case
+ Charging Cable (Micro-USB)
+ Quick Start Guide
+ Safety Instruction